Attendant Control Panel (ACP)
CPR – Hold down
button to return the
bed to a flat position.
CPR button works
even if functions are
locked out.
Calf section selection buttons – One of these
two buttons will be selected at all times.
Whichever button is selected will determine the
position the calf section profiles into from flat.
Lock / Unlock
Function button.
Press the lock button
then the function(s)
you want to lock out.
To unlock use the
same sequence.
To lock all functions at
once, press and hold
down the lock button
for five seconds.
Function selection buttons –
select the function you want
then press the raise or lower
button to adjust that function
•
Yellow light indicates function is locked out
•
Green light indicates function selected
Height button.
For Standard low height – select
the function button then press
the lower button.
For Extra low height – press and
hold the function button and
lower button simultaneously.
Under bed
lighting
ON/OFF
Fowler
position
Vascular
position
Backrest
Calf section
Raise button
Lower button
Tilt Knee-break
Patient control
1. Select one of the function buttons.
Bio-Contour,
Backrest, Height or Knee-break.
2.
The
indicator light
on the selected function
will turn
green
. If the indicator light is yellow, that means the
function has been locked out at the Attendant Control
Panel.
3. Press Lower or Raise button
to adjust that function.
•
Yellow light indicates function is locked out
•
Green light indicates function selected
Bio-Contour raises
backrest and
knee-break
simultaneously
Backrest
Raise button
Lower button
Knee-break
ArjoHuntleigh AB
Verkstadsvägen 5
241 38 Eslöv
SWEDEN
www.ArjoHuntleigh.com
815-503-1
12/2012
If you experience any problems when using this product:
1. Refer to the instructions for use (part no. 746-435) for further information.
2. Check the troubleshooting guide in the product service manual (part no. 746-436).
3. Call the ArjoHuntleigh UK 24 Hour Helpline on 08457 342000.
ENTERPRISE
®
8000
TROUBLESHOOTING
