Preventive Maintenance Schedule
23
Preventive Maintenance Schedule
The
Maxi 500
LVVXEMHFWWRZHDUDQGWHDUDQGWKHIROORZLQJDFWLRQVPXVWEHSHUIRUPHGZKHQVSHFL¿HGWR
HQVXUHWKDWWKHSURGXFWUHPDLQVZLWKLQLWVRULJLQDOPDQXIDFWXULQJVSHFL¿FDWLRQ
WARNING:
The points on this checklist are the minimum the manufacturer recommends. In some
cases more frequent inspections should be carried out. Continuing to use this equipment without
FRQGXFWLQJ UHJXODU LQVSHFWLRQV ZLOO VHULRXVO\ FRPSURPLVH WKH XVHU DQG UHVLGHQWSDWLHQW¶V VDIHW\
3UHYHQWLYHPDLQWHQDQFHVSHFL¿HGLQWKLVPDQXDOFDQSUHYHQWDFFLGHQWV
WARNING
6DIHW\ UHODWHG PDLQWHQDQFH DQG DXWKRUL]HG VHUYLFH PXVW EH FDUULHG RXW E\ TXDOL¿HG
personnel, fully trained in servicing procedures by Arjo, and equipped with correct tools and proper
documentation, including Parts List and Service Manual. Failure to meet these requirements could
UHVXOWLQSHUVRQDOLQMXULHVDQGRUXQVDIHHTXLSPHQW
WARNING:
Never proceed to maintenance or service while lift is in use with a patient.
POINTS TO BE INSPECTED BY
86(56(59,&(7(&+1,&,$1
FREQUENCY
Annually (12 Hours*)
Before every use
Initially
Ð Ð Ð
1) When equipped with a 2-point spreader bar, ensure that the bar safety latches are present and
are freely pivoting.
x
2) Ensure that the battery charge indicator is within the normal range.
x
3)
(QVXUHWKDWWKHFDVWHUVDUH¿UPO\¿[HGWRWKHFKDVVLV
x
4) When equipped with a DPS, make sure that the DPS is properly attached with the pin and that the
pin is secured with the locking spring.
x
5) Make sure that the mast is secured to the base with the locking screw.
x
6) Verify the proper functioning of the rear castor brakes.
x
x
7) Ensure that the actuator attachments are tightened at both ends.
x
x
8) Check front and rear castors regularly for hair and debris; clean when necessary.
x
9) Press the emergency stop button and make sure that all electrical power is cut off. No action
VKRXOGRFFXUZKHQDFWLYDWLQJWKH³8S´RUµ'RZQ´RXUPHWHUDQGEDWWHU\LQGLFDWRUVKRXOG
also shut down.
x
x
10) Check all the functions on the hand control. Ensure that the hand control touch pad membrane is
intact.
x
x
11) Check all the functions on the control box.
x
x
12) Check the function of the emergency lowering device by applying weight to the lift and pulling the
red handle on the actuator.
x
x
* Time period indicated by the Hour meter.
