Figure 37
ASSEMBLE THE AURALIS SYSTEM
29
5. Place the cable in the cable management.
6.
&ORVHWKHÀDSDURXQGWKHFDEOHZLWKWKHSUHVV
studs. See Figure 37
7. Connect the power cable to a power source.
Auralis Plus mattress extensions
(accessory only)
(5 steps)
The mattress extensions are intended to be used
when the bed frame is operated in fully extended
length mode.
NOTE
These are guidelines only and should not replace
clinical experience or judgement. If there is no
improvement in the patient’s condition, specialist
advice should be sought.
1. Select the correct size mattress extension for the
width of bed extension.
2. Remove all packaging.
3.
0DNHVXUHWKDWWKHPDWWUHVVH[WHQVLRQLV¿WWHG
with its cover.
4. Place the mattress extension with the zip nearest
the bottom into the space between the mattress
and the footboard (see Figure 38). Make sure that
there are no sharp edges which may rip the cover.
5. Make sure that the tube-set passes underneath
the indentation in the mattress extension (see
Figure 39).
CAUTION
Do not use the mattress extension without its
cover. It provides a protective barrier against
biological contamination of the foam.
Figure 38
Figure 39
