31
CLEANING AND DISINFECTION
Allowed disinfectants
DISINFECTANT
HYBRID
MATTRESS
SYSTEM
TOP
COVER
BOTTOM
COVER
RECOMMENDATIONS FOR
USE
Alcohol solution
≤
70%
●
●
●
Coating may swell when wet
hence care must be taken to avoid
accidental scratches and fold only
when dry before storage.
Chlorine solution
≤
1%
(10,000 ppm)
1
●
●
●
Acceptable use at pH 7-9. Must be
towel dried (avoid harsh abrasion)
after rinsing with clean water.
Quaternary ammonium
solution 1920ppm
●
●
●
Acceptable for use at pH 7-10
only. Always check the label
fi
rst.
DO NOT USE WIPES containing
Sodium Hydroxide (NaOH). Fully
rinse with clean water to remove
residual chemicals
Quaternary ammonium
solution, 3-15%
●
●
Acceptable for use at pH 7-10
only. Always check the label
fi
rst.
DO NOT USE WIPES containing
Sodium Hydroxide (NaOH). Fully
rinse with clean water to remove
residual chemicals.
Hydrogen peroxide
solution, 3-10%.
●
Acceptable for use at pH 5-9 only.
Low and high pH’s will DAMAGE
the coating. Fully rinse with water
to remove any acid or alkali.
1
Chlorine concentrations may vary from 250 ppm to 10,000 ppm depending on local policy and
contamination status.
NOTE
Rinse and dry thoroughly with clean water to remove residual chemicals after disinfecting with
each chemical before storage
