11
3. Maintenance
Servicing
The
Slop Hopper
should
be serviced by
Arjo
trained
personnel.
Cleaning the Water
Filter
The water filter is located at the inlet of the floating
valve. Clean the water filter as follows:
• Turn off the water supply by using the upstream
arranged shutoff unit
.
• Disconnect the pressure hose from the floating
valve.
• Remove the filter insert from the floating valve
with the aid of pliers.
• Clean and check the filter. Replace the filter if
necessary.
• Replacement is the reverse of the above
procedure.
Cleaning the
Drainage Tubing
If the drainage tubing is blocked, check and clean the
drainage of the
Slop Hopper
. If this has not cleared the
blockage, the drainage pipe has to be dismounted and
cleaned as follows:
• Turn off the water supply by using the upstream
arranged shutoff unit.
• Detach the clamp connecting drainage pipe to the
Slop Hopper
. Pull the siphon trap drown and
remove from the appliance. Clean the siphon
trap.
Floating valve
Filter insert
Pressure hose
