background image

7

A float switch installed at the water tank avoids an 

overfilling of the tank by turning on the pump and 

emptying the tank in case of level exceeding.

How to Use

Pour the waste into the bowl.
Flush the residue of the waste by pushing the hand 

button on the front of the unit or, if fitted, the knee-

actuated button.
The flush will stop automatically.
The 

Slop Hopper 

is designed to flush away liquids and 

suspensions of solids into the sewer system. The type 

and amount of liquids/suspensions that can be flushed is 

to be determined by sewer waste regulations in 

accordance with current local regulations and rules.

 

 

The 

Slop Hopper

 should not be used for the disposal of 

needles and syringes, human tissues or blood, human 

infections and pathological wastes (i.e. biopsy waste, 

diseased organs).

Cleaning

The 

Slop Hopper

 should be cleaned and disinfected 

regularly by 

Arjo

 trained personnel. Most commercially 

available cleaning products can be used except chlorine 

based products.

Caution

Never use products containing chlorine, abrasives or steel wool for
the cleaning since such products will lead to corrosion marks and
scratches on the stainless steel.

Do not spray the appliance with water.

Summary of Contents for AGSP





























Reviews: