manualshive.com logo in svg

Arizona Instrument JEROME 431-X, Operation Manual

Share
Download
Arizona Instrument JEROME 431-X Operation Manual Download Page 44

AZI Customer Service 800-528-7411 or 602-470-1414 

Page 44 of 56

 

13.

 

APPENDIX C - JEROME

®

 COMMUNICATIONS SOFTWARE 

 
The Jerome

®

 Communications Software (JCS) is used with 431-X Mercury Vapor Analyzers that 

feature the communications configuration option, available in both SMV and Non-SMV 
instruments. 
 

•

 

The JCS allows the user to program the instrument for unattended monitoring and to 
download recorded data stored in the Jerome

®

 Data Logger. 

•

 

Automatic sampling can be initiated every one (1) to sixty (60) minutes with 
programmable audible alarm levels. 
 

The Jerome

®

 Communications Software (JCS) operates with the Jerome

®

 431-X Mercury Vapor 

and Jerome

®

 631-X Hydrogen Sulfide Analyzers that have the “Communications Configuration” 

option installed.  The software can control instrument sampling for unattended continuous 
operation, collect data, graph this data in real time and perform statistical analysis.  
 
The software can also program the Jerome

®

 Data Logger.  This optional accessory enables data 

storage during manual sampling or portable automatic sampling without being attached to a 
computer.  The Data Logger initiates automatic sampling, triggers alarms and stores data.  The 
logged data may then be downloaded to the computer when it is convenient.  The Data Logger 
stores up to 1,000 data points.  On SMV units with Data Logger functionality, this functionality 
is integrated into the instrument, while Non-SMV units use an external Data Logger (AZI# 6100 
0010) that attaches to the back of the instrument. 
 
The JCS is menu-driven and easy to use.  Each 
display screen is designed for clarity with self-
explanatory menu options, such as “Operate 
Instrument” or “Display Stored Data.”  Select menu 
options using either a mouse or a track ball pointing 
device or a standard keyboard.  The user creates 
records, or files, for computer storage of collected 
data.  Data is easily retrieved for later viewing, 
graphing, printing or editing with spreadsheet or 
word processing software (not provided).  Data can 
be used for ongoing record keeping or for fulfilling 
local regulatory requirements. 
 
 
Before using this software, familiarization with the operation of the Jerome

®

 Hydrogen Sulfide 

Analyzer or Mercury Vapor Analyzer is important.  Also, prior to installation of this software 
you should be familiar with the personal computer and operating system you are using.  If you 
have any questions about how to proceed, call AZI Customer Service at (800) 528-7411 or (602) 
470-1414 or send an e-mail to 

[email protected]

 for assistance. 

 
 
 
 
 

Summary of Contents for JEROME 431-X

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands