Ariterm EKERUM, Installation And Operating Instructions Manual

Page: 7 / 24

PELLET STOVE KMP EKERUM / NEPTUNI
ARITERM SWEDEN AB
Installation Instructions - 2011.08.19 - 7 /24
1.3 Technical data
Heating output HI / LO ..................................... approx. 6 / 3,5 kW
Pellet hopper ................................... 38 litres (approx. 20 - 25 kg*)
Efficiency level HI / LO ........................................ approx. 91 / 91%
CO HI / LO ...........................................
0,012 / 0,014% at 13% O
2
Smoke temperature HI / LO ......................................... 160 / 110˚C
Flue gas fan HI / LO. .................................................... 4.8 / 2.8 g/s
Recommended negative pressure in chimney ........................ 10 Pa
Temperature range thermostat ............................ approx. 10 - 30˚C
Weight ..................................................................... 100 - 125 kg
Electrical connection .................................................. 230 V 50 Hz
Electrical output (firing) ....................................................... 450 W
Electrical output (operation) .................................................. 20 W
Fuel .................................... wood pellets Ø6 or 8 mm, EN 14961.
* Depending on fuel density.
Fig. 3
1.4 Control panel
The control panel has a display and adjustment dial (see fig. 3):
- The display shows the operating mode and the current temperature.
Explanatory text scrolls through the display every 5 seconds.
- The adjustment dial is used by pressing or turning.
- Turn to scroll through the menu or change the value when adjusting.
- Pushing once makes a selection in the menu.
Example:
Connect the stove to the wall socket. Pressing once causes the panel to ask “Start?”.
Pressing again means that you confirm the question and the stove starts.
If you turn clockwise instead you come to “Stop T”,“UserMenu” and “Back”.
Stop T:
Press to adjust stop temperature..
Usermenu: Press to adjust time and temperature settings.
Back: Press to return to the starting point.
The stove is started by pressing the control panel dial and confirming. “Start?”
by pressing again. Take care not to start the stove when there
are flammable objects above or immediately adjacent!
To shut off, press the control panel dial and confirm “Stop?” by pressing once.
Other menu steps are shown in section 1.6.
1026
590
530
Ø76
917 ± 5
160 ± 5
Fig. 2