CyberDome Programming Instructions
23
C
YBER
D
OME
16X P
ROGRAMMING
Figure 33: CyberDome Display Screen
CYBERDOME
- - SITE 001 - -
(SEQ) – EXIT
Note:
If the monitor displays nothing, press
0
. The CyberDome being programmed is an
older model, and requires a ATD-304 keypad for programming. Contact your local supplier
for details.
C
YBER
D
OME
P
ROGRAM
S
ELECTION
From this point, all menus will appear on the monitor screen. The first screen is shown in
Figure 34, below. The Program Select Menu is the top-level menu for all setup and
programming procedures, described in the following sections.
Figure 34: Program Select Menu
PROGRAM SELECT
-- SITE 0000 --
SETUP
(1)
PRESETS
(2)
TITLES/AREAS
(3)
CURRENT STATUS
(4)
TOURS
(5)
ENTER SELECTION :
(ALARM) – HLP(SEQ) - NEXT
Note:
At any point during the following procedures,
alarm
can be pressed to receive context-
sensitive help.
C
YBER
D
OME
S
ETUP
1.
To enter the CyberDome Setup menus, press
1
from the Program Select Menu. The
menus and their corresponding functions are listed in the table beginning on the next
page.
2.
To advance to the next menu without changing any settings, press
seq
. To change a
setting, enter the number from the choices listed; some menus will require the use of
the
keys or the joystick. After the last menu display, press
seq
to return to the
Program Select Menu.
