10
CyberDome Programming Instructions
4.
Next, the Title Entry Menu will be displayed. While the cursor (arrow) is in the far left
position (under the left caret), use the arrow keys or the joystick to move the position of
the title up and down on the screen.
Figure 14: Title Entry Menu
00<
>
USE
TO ENTER
TITLE AND LOCATION
(ALARM)-HLP (SEQ)-NEXT
5.
Next, move the cursor to the right (inside the carets). Edit the title by using the
keys (or the joystick) to scroll to the desired alphanumeric character. Once the title
is set, press
seq
to return to the Preset Titles Menu and once more to return to the Edit
Titles Menu.
Area Titles (Steps 6-11):
6.
The CyberDome Day-Nite can be programmed to display a title over a selected area of
its pan/tilt routine. Press
1
from the Edit Titles Menu to assign and edit area titles.
The following menu is displayed:
Figure 15: Area Titles Menu
ASSIGNING AREA TITLES
-- SITE 0000 --
ENTER AREA NUMBER : --
(00-15)
LOWEST UNUSED AREA : 00
(ALARM)-HLP (SEQ)-NEXT
7.
Select the number of the area to be titled and programmed. You may either select an
unused area number, or reprogram one that has already been programmed.
Figure 16: Defining Area Menu
ASSIGNING AREA TITLES
-- SITE 0000 --
TO DEFINE AREA, MOVE
CAMERA TO UPPER LEFT
CORNER AND PRESS (CLR)
THEN TO LOWER RIGHT
CORNER AND PRESS (SET)
(ALARM)-HLP (SEQ)-NEXT
While the cursor is between
carest, use the joystick to scroll
through the alphanumeric
characters
While the cursor
is under the left
caret, use the
joystick to
position the line
