Aritech ADVISOR CD72, User Manual

Page: 13 / 24

User Manual for CD72/95/15003 Page 13
7. Press the Accept key again.
! ! ! !
Normal Set
! ! ! !
Normal Set
"
Area 2 is arming. If programmed, the buzzer for the area
will begin.
Area 2 Arming
Beeeep
You must exit the protected area by the designated exit
route.
Leave Now
Area 1 Armed
Both areas are now armed.
Area 2 Armed
Enter Area No.
TUE 23 APR 07.41
A
RMING A SPLIT SYSTEM WITH OPEN ZONES
When arming (switching on) the alarm, you may get the message ‘Open Zone(s)’ along with a list of
the zones in the premises which have not yet been closed. You should close these zones and then
retry arming the alarm. However, occasionally you may not be able to close an open zone because, for
example, a door lock or magnetic contact may be malfunctioning. You can then exclude this open zone
from the system (called inhibiting a zone). A split system lets you control open zones in specific areas
of the premises.
Only use this exclusion option when absolutely necessary as any inhibiting of zones will reduce the
security level of your system.
Although you can exclude an open zone when the tamper alarm has been triggered (identified by the
letter ‘T’ in front of the open zone listed), you will not be able to arm the system until the tamper alarm
has been rectified.
As explained in section “Arming a split system,” a split system can be programmed to have two
different standby message displays, that is the message you see when you approach the keypad, and
two different messages immediately after entering your code into the keypad. The instructions below
use the displays “Time/Date” and “Area
[
number
]
armed.”
If your code lets you access more than one security area, you can select one of them to arm.
1. Go to the keypad. The current day, date and time are
displayed. An example is shown.
TUE 23 APR 08.21
2. Press the key 0 and then enter your code. A ‘*’
appears in the display for every key you press. Use the 0
key to cancel an incorrect entry and to restart a new entry
of the code.
Enter Code