Ariston EuroCombi Type C 23 MFFI, Servicing Instructions

Page: 7 / 32

Supplied By www.heating spares.co Tel. 0161 620 6677
7 B029
Removing the electrodes 1.
Remove rubber gasket “I” (see fig. 1.13);
2.
Disconnect ignition leads by pulling downward (see fig. 1.14);
3.
To remove the flame sensor, disconnect the cable at its only connection
point close to the P.C.B. (see fig. 1.15);
5.
Remove screw “J” using a Philips No. 2 star tip screwdriver (see fig. 1.16);
6.
Slide the electrode gently downward (see fig. 1.17).
To replace, repeat the steps in reverse order, paying particular attention to the
following:
a
- Centre the electrode in the positioning hole carefully, otherwise the elec-
trode may break;
b
-Check that the cables have been connected correctly;
c
- Check that the rubber gasket covers the cable/electrode connection
point completely.
Fig. 1.13
I
Fig. 1.14
Fig. 1.15
Fig. 1.16
Fig. 1.17
J