/ 41
SAFETY RULES
WARNING
This manual constitutes an integral and
essential part of the product. It must be kept
with care and accompany the product at all
times, whether in case of transfer to a new
owner / user or use on a new application.
Read the information and warnings given in this
manual in full; they are essential to the safe
installation, use and maintenance of the product.
Do not use the product for any purpose other than
that specifi ed in this manual. The manufacturer is
not liable for damage resulting from improper use of
the product or failure to install it as instructed herein.
All routine and extraordinary maintenance must
be done exclusively by qualifi ed staff using solely
original spare parts. The manufacturer is not liable
for damage resulting from failure to observe this
instruction, which may compromise the safety of
the installation.
Symbol legend:
Failure to comply with this warning implies
the risk of injury to persons, which in some
circumstances may be fatal
Failure to comply with this warning implies
the risk of damage – even serious damage in
some circumstances – to property and plants
or harm to animals.
The manufacturer is not liable for damage
resulting from improper use of the product or
failure to install it as instructed herein.
Install the appliance on a solid wall that is not
subject to vibrations.
Noise during operation.
When drilling the wall, take care not to damage
any existing electrical wiring or piping.
Electrocution caused by contact with live wires.
Damage to existing systems.
Flooding due to water leaking from damaged
pipes.
Perform all electrical connections using
suitably-sized conductors. Follow the
instructions given in this manual when
hooking the product up electrically.
Fire caused by overheating due to electrical
current passing through undersized cables.
Protect connection piping and cables so as to
prevent damage to them.
Electrocution caused by contact with live wires.
Flooding due to water leaking from damaged
pipes.
Make sure the installation site and any systems
to which the device must be connected
comply with applicable regulations.
Electrocution caused by contact with live wires
that have been incorrectly installed.
Damage to the appliance caused by improper
operating conditions.
Use suitable manual tools and equipment
(make sure in particular that the tool is
not worn out and that its handle is fi xed
properly); use them correctly and make sure
they do not fall from a height. Replace them
once you have fi nished using them.
Personal injury caused by fl
ying splinters
or fragments, dust inhalation, shocks, cuts,
puncture wounds and abrasions.
Damage to the appliance or surrounding objects
from fl ying splinters, knocks and cuts.
Use suitable electrical equipment (in
particular, make sure that the power supply
cable and plug are in good condition and that
the rotating or moving parts are properly
attached); use the equipment correctly, do
not obstruct passageways with the power
supply cable and ensure that no equipment
runs the risk of falling from a height.
Disconnect the equipment and put it safely
back in place after use.
Personal injury caused by fl
ying splinters
or fragments, inhalation of dust, knocks,
cuts, puncture wounds, abrasions, noise and
vibration.
Damage to the appliance or surrounding objects
from fl ying splinters, knocks and cuts.
Make sure that any portable ladders are
securely positioned, that they are strong
enough, that the steps are intact and not
slippery, that the ladders are not moved
with someone on them and that someone
supervises at all times.
