ARISTEL NETWORKS
PTY. LTD
Models: Q1 or later, ARB2, ARB3, ARB4 (GSM) & NEOS 3000A-3G ARB4 Manual
Ver. 1.4 Nov 2009
page 8
Technical
Programming
９５ＸＸ＃
Set the waiting period after dialling.
ＸＸ
is 00 to 83 seconds. The default is 57 seconds.
9557#
６９ＸＸ＃
Set the times of fake ring back tone.
ＸＸ
is 01 to 99 times. The default is 20 times.
6920#
５４Ｘ
Set the delay period between dialled with fake ring back tone.
Ｘ
is 1 to 9 and
＊
(=10), unit is 0.5 seconds. Default is 3, the time period is 1.5 seconds.
543
５０Ｘ
Set the interval of number to number of dial.
Ｘ
is 0 to 9 seconds. Default is 4 seconds. Set
５００
is 0.5 seconds.
504
５１Ｘ
Set the send delay time.
Ｘ
is 0 to 9 seconds. Default is 0. It represents 0.5 seconds.
510
９４ＸＸ＃
Set the digits of send number.
ＸＸ
is 02 to 31 digits. The default is
9431#
Hot Line
32X#
X=0, Disable the Hot Line function. X=1, Enable the Hot Line function.
320#
33X#
X= Hot Line Number, Set the Number from 3 to 13 digits.
FREQUENTLY ASKED QUESTIONS
FAQ 1. The Power light does not come on after power up.
Action. Check the power adapter and power cord/socket for correct operation
FAQ 2. How do I check the LED status?
Action. Check Figure 3 on page 4
FAQ 3. When I pick up the phone I cannot hear dial tone.
Action. Check that the phone is OK and operating correctly
Check that the phone line (cord) is connected
Check the pattern of the LED lights for more information see Figure 3
FAQ 4. When I pick up the phone I hear music
Action. The SIM is not registered to the network
The SIM is not operating correctly. Plug it into a mobile phone and check for operation
FAQ 5. I cannot hear the other party’s voice
Action. Retry the call. It could be a network connection problem
The signal strength may be too low for proper transmission and reception. Relocate the antenna
FAQ 6. When I dial the mobile number, there is no answer
Action. Mobile network is still searching for mobile phone
Check that line and antenna are connected correctly
FAQ 7. I cannot dial via the PBX system
Action. Power off the NEOS unit. If you cannot make a call via the PBX, the connection to the PBX or
the PBX may be faulty. Consult your local PBX dealer.
If you can make a PBX call with the NEOS powered off, consult your NEOS dealer
Aristel Networks Pty. Ltd
Unit 1 / 25 Howleys Rd.
Notting Hill, Victoria, 3168
Ph:
03 8542 2300
Fax: 03 9544 3299
Web: www.aristel.com.au
Email:
E. & O. E.
