ARISTEL NETWORKS
PTY. LTD
Models: Q1 or later, ARB2, ARB3, ARB4 (GSM) & NEOS 3000A-3G ARB4 Manual
Ver. 1.4 Nov 2009
page 7
Transfer
Dialler
６５Ｘ＃
Set the forward number on busy.
Ｘ
is the forward number from 1 to 10 digits.
65
＊
#
cancels the function.
６３Ｘ＃
Enable dialler function for mobile international calls.
NEOS will transfer the international call through the mobile by specified operator.
63
＊
#
cancels the function.
Example: Set
６３３＃
.
When dial
００２８
６
２９８２０３１５６
, NEOS will call
００３８
６
２９８２０３１５
６
through the mobile.
６６Ｘ＃
Enable the dialler function for long distance calls and international calls of PSTN.
NEOS will transfer all the calls of long distance and international through PSTN by specified
operator.
66
＊
#
cancels.
Example: Set
６６３＃
. When dial
０２８５２９８２０３
, NEOS will call
１８
０３０２８５２９８２０３
through PSTN.
５８Ｘ
Enable auto-add number function.
Ｘ
is the add number - only 1 digit.
58
＊
cancels the
function.
It is used for a client that has no PABX and uses the virtual PBX of a network operator.
Example: Before client dials 9 to catch the PSTN line then dials the call number. Set
５８９
,
the client dials
＊
to catch line then make call. NEOS will add 9
before the number to make
a call from PSTN.
Others
６２Ｘ＃
Set the digits of MVPN group.
Ｘ
is 1 to 9 digits,
＊
cancels.
62*#
.It is the default.
When you call the MVPN number, you need to press # to end the dial.
Example: Set
６２３＃
. When
dial
１２３＃
NEOS will call
１２３
through the mobile.
If you dial
１２３
NEOS will call
１２３
through PSTN.
。
９３１
Disable barring an incoming call. NEOS will ring when an incoming call occurs.
９３２
Enable barring an incoming call. NEOS will bar the call when an incoming call occurs. It is the
default.
９１７
Enable call waiting. You can press HOOK or FLASH to hold the call and answer the other call.
９１８
Disable call waiting. It is the default.
９９９
Restore the factory defaults.
Network
６７ＸＸＸＸＸＸ＃
Enable searching specified network.
ＸＸＸ
+
ＸＸＸ
is the MCC+MNC. XXXXX and XXXXXX both
are available.
５７２
Enable the RSSI (received signal strength indicator). When you set 572 please check the LED
of MO and CO as below. Press
＃
to escape.
MO
LED
CO
LED
RSSI Network
Quality
ON ON
－
51db
～
－
64db
BEST
ON OFF
－
65db
～
－
82db
BETTER
OFF ON
－
83db
～
－
95db
GOOD
OFF OFF
－
96db
～
POOR
９３７
Disable caller line identification (CLI). Enables calling party to prevent presentation of its line
identity to called party.
９３８
Enable caller line identification (CLI). Shows the number of calling party. It is the default.
５３Ｘ
Adjust the volume of receiver.
Ｘ
is 0 to 4.
５３３
is default. It represents level 3.
６０Ｘ＃
Adjust the volume of transmitter.
Ｘ
is 0 to 4.
６０２
#
is default. It represents level 2.
６４Ｘ＃
Set the code of caller ID.
Ｘ
：
＊＝
cancel
１＝
DTMF.
641#. It is the default.
２＝
V.23 FSK
３＝
BELL 202
９２３
Disable assign specified carrier of SIM. It is the default.
９２４
Enable assign specified carrier of SIM.
NEOS calls through the same carrier of the SIM only. If you change SIM to a different carrier
NEOS will bar the call.
５９１
Disable assign specified SIM. It is the default.
５９２
Enable assign specified SIM.
NEOS calls through the SIM only. If you change to another SIM, NEOS will bar the call.
