ARISTEL NETWORKS
PTY. LTD
Models: Q1 or later, ARB2, ARB3, ARB4 (GSM) & NEOS 3000A-3G ARB4 Manual
Ver. 1.4 Nov 2009
page 6
Time limit
&
Call signal
９００
Disable outgoing time limit. It is the default.
９１１
Disable break in the call. NEOS will emit the reminding tone on 30 seconds before ending
and keeping the call until break.
９１２
Enable break in the call. NEOS will emit the reminding tone on 30 seconds before ending and
break the call at the end.
９０Ｘ
Set the time of one outgoing call.
Ｘ
is 1 to 9 minutes. The default is
３
minutes.
９６５
Disable the counting signal for SCM50.
９６６
Enable the counting signal for SCM50. It should be enabled when coupling SCM50.
９６３
Disable the polarity reversal for outgoing call. It is the default.
９６４
Enable the polarity reversal for outgoing call.
９６７
Disable the polarity reversal for incoming call. It is the default.
９６８
Enable the polarity reversal for incoming call.
Tone
Frequency
９６０
Set the dial tone as
523Hz (ARB2) or 425X25Hz (ARB3/ARB4).
９６１
Set the dial tone as
400Hz (ARB2) or 425Hz (ARB3/ARB4)
.
９６２
Set the dial tone as
350Hz+440Hz (ARB2) or 400Hz+425Hz (ARB3/ARB4)
.
It is the default.
９２７
Disable the false ring back tone. It is silent without the reminding tone (DU DU) and false
ring back tone.
９２８
Set the reminding tone (DU DU) after dial.
９３３
Set the reminding tone (DU DU) then false ring back tone after dial.
９３４
Set false ring back tone after dial. There is no reminding tone (DU DU). It is the default.
９３９
Set the false ring back tone as
400Hz
.
９６９
Set the false ring back tone as
440Hz+480Hz
.
It is the default.
９２９
Set the reorder tone as
400Hz
after the call party breaks the call.
９３０
Set the reorder tone as
480Hz+620Hz
after the call party breaks the call. It is the default.
Router
Selection
９２５
Disable manually select the mobile trunk. It is the default.
９２６
Enable manually select the mobile trunk.
６１Ｘ＃
Set the access code of manually selecting the mobile trunk. X is 0 to 9 and
＊
. 9 is default.
You can assign to select the mobile trunk by pressing 9 then dial the number when enabling
926 and set 619#.
Example: After enabling 926, dial
９０５０９１２３１２３
, it will call
０５０９１２３１２３
through
mobile trunk.
５７１
Disable automatically detecting PSTN line. When PSTN line is connected and the routing
function activated.
５７０
Enable automatically detecting PSTN line. NEOS will detect if the PSTN line is connected.
Speed Dial
５７３
Disable speed dialling through phone book of SIM. It is the default.
５７４
Enable speed dialling through phone book of SIM.
５２Ｘ
Set the speed dialling code. X is 0 to 9 and
＊
.
＊
is default.
Example: Set 574 and 52
＊
.
When you dial
＊
１０
NEOS will call by the 10th number of SIM
through the mobile trunk.
