16
Tensor
The potentiometer module must generally run under a potential divider circuit.
5.3.3
Additional auxiliary switches S1-S4
(add-on board)
The additional board ZW provides outputs for up to four additional
limit switches ready to be freely programmed.
Switching points
It can be defined for each relay a left and right switching point.
While moving from left to right (direction CLOSE) applies to the
transitions:
-
SPL
left switching point changes from OFF to ON
-
SPR
right switching point changes from ON to OFF
Example cam positive
By defining and position of these two switching points different shift pattern (cam profiles) can be freely defined.
Example cam negative (by changing the switching points from the same direction)
ADVICE
!
