6209020 07/2013 - Rev.02
14
3
Safety
3.1
Inflating the boat
The boat inflation with a hand pump is carried out by means of the
inflation valves -
grey
on the inner air chambers and
black
on the main
external tube. The grey and black valves can have two different positions
when opened:
1.
Air sealing (Normal)
2.
Open (to deflate)
a)
Make sure that the valves are in the sealing position - i.e. the central
pin can rotate inwards by 7/8 mm and then returns to the initial
position. Otherwise the pin must be pressed and rotated by a quarter
of a turn.
b)
To inflate the boat start from the inner air chambers with GREY valves. Do
not apply an excessive pressure. Then, inflate the main tube with BLACK
valves until a good pressure is reached.
c)
Close the valve cap by turning clockwise.
WARNING
For safety purposes, the proper inflating procedure must be followed.
CAUTION
DO NOT
use air compressors or scuba tanks to inflate your boat.
CAUTION
The pressure of the boat fluctuates with changes in temperature. Adjust
the pressure by inflating and deflating the boat.
