ARIETE 2712/1, Manual

Page: 40 / 90

- 38 -
EN
2) Through remote control:
- Press the “CLEAN” button to enter the “pause” mode.
- Keep the “ ” button to enter the programming.
- Press the “” and “” buttons to set the day, from the number “1” (Monday) to “7” (Sunday).
- Press “CLEAN” to confirm and exit or “ ” to set the daily cleaning time.
- Press the direction buttons “” and “” to set the digits and the buttons “” and “” to pass from hours to
minutes, after having confirmed by pressing the “ ”.
- Press “CLEAN” to confirm and return to days.
Important!
A sound signal will be emitted to show that the time has been saved. If no sound is
heard, re-enter the settings and save again.
Important!
In case the robot is switched off with the ON/OFF button (T), it loses the whole 7-day
programming which could have been made previously.
At the selected time, the Robot will move from its charging station to start the cleaning cycle and then
return to the station when the cleaning is complete or if the batteries are almost flat. once it has begun
to return to the station, the Robot may take up to 30 minutes to intercept the signal and reposition itself
on the “Home Base”.
CLEANING AND MAINTENANCE
For the correct maintenance of the Robot, follow the rules below:
CLEAN THE SIDE bRUSHES ON A
REGULAR bASIS AND REPLACE THEM
IF DAMAGED.
- Remove the screw in the centre of each
brush support.
- Remove the brushes and replace them,
making sure that the marks “L” (left) and
“R” (right) meet with the same marks on
the appliance base.