ARIETE 1318, Manual

Page: 23 / 145

23
EN
PROBLEMS CAUSES REMED , ES
Coffee
o
Y er À owing from
the ¿ lter edges
Probably too much ground coffee
has been put into the
¿ lter holder
that has pre Y ented to fully tighten
the ¿ lter holder in its housing
Remo Y e the ¿ lter holder and clean the hooking
seat with a sponge Fig Repeat the
operation placing the correct amount of coffee in
the
¿ lter
Ground coffee has remained on
the
¿ lter holder connection seat
Clean the seal with a toothpick or a sponge Fig
7 he ¿ lter containing ground coffee
has the output hole clogged
Remo Y e and disconnect the ¿ lter holder slowly
because any remaining pressure could cause
splashes or sprays
Clean the clogged hole of
the ¿ lter with the pin pro Y ided Clean the ¿ lter by
using a tablet for ¿ lter cleaning and following the
instructions gi Y en on the packaging
Coffee is not
dispensed or is
dispensed too
slowly 7 he perforated disc located in the
coupling seat of the ¿ lter holder
has the holes clogged
Operate the machine without the ¿ lter holder
making water À ow , f the water is still not À owing
uniformly through all holes, descale using the
1 OCAL Ariete product a Y ailable in the Ariete
ser Y ice centres following the instructions in the
package
7 he ¿ lter containing ground coffee
has the output hole clogged
Remo Y e and disconnect the ¿ lter holder slowly
because any remaining pressure could cause
splashes or sprays
Clean the clogged hole of
the ¿ lter with the pin pro Y ided Clean the ¿ lter by
using a tablet for ¿ lter cleaning and following the
instructions gi Y en on the packaging
7 oo ¿ ne ground coffee blend 7 ry using coarser coffee blends
7 oo pressed coffee blend Press the coffee inside the ¿ lter using less
pressure
7 he tank is not fully inserted Fit the tank correctly push it completely down
7 here is little water and the pump
does not suck
Make sure the tank is ¿ rmly attached and check
that the water le Y el in the tank is normal Fill with
cool tap water up to the MA ; le Y el mark