Aria-130 Digital Key Telephone System
Issue: 1.2
Installation Manual
65
Note:
−
The distance between Digital Terminal Interface Board and Digital Terminal: see Table
2.3.5
In ARIA-130 system, LKD-30DS with 2B-module and secondary terminal can be connected to only every
even-numbered port (0,2,4,…) of DTIB12/DTIB24/DSIB, then any digital terminal can not be connected to
the consecutive odd port(1,3,5,…) in that case. See clause 2.4.12.3 2B-module and clause 2.4.12.4 GDK-
PC PHONE in section 2 for more details regarding 2B-module and CTI module.
Figure 3.4.3 DTIB
DTIB12/DTIB24 can be installed in any universal slot No. 1-6 of any KSU.
So It is recommended that a board among DTIB12, DTIB24 and DSIB is installed in the most left slot and
a Digital Keyset with display is connected to the first port the board when the first initialization of the
system, since the FIRST STATION of the system at first can only access the system database without PC
Administration. See clause 3.4.2 MPB Installation.
3.4.4.2 SLIB24/SLIB48 Installation
SLIB24/SLIB48 can be installed in any universal slot and allows 6 single line analogue devices to be
connected. A MSGU/MSGU48 with 6 circuits can be optionally installed on SLIB24/SLIB48 respectively to
light a message waiting lamp in the SLT connected to SLIB24/SLIB48, and a DTRU with 2 receivers can
be optionally installed on SLIB24/SLIB48 to receive DTMF signals.
Function of LED
LED
Function
Remark
LED1
The status of ports. (ON: in use, OFF: idle)
Table 3.4.7 LED on SLIB24/48
C
H
A
M
P
1
