Aria-130 Digital Key Telephone System
Issue: 1.2
Installation Manual
40
2.4.13.1 Digital Keysets And Terminals
Various types of digital terminals are used with ARIA-300 DTIB12/DTIB24/DSIB as below:
Model
Description
Model
Description
KD-36EXE
24 Flexible Button Display
KD/E-36EXE
24 Flexible Button Display
KD-36ENH
24 Flexible Button Normal
KD/E-36ENH
24 Flexible Button Normal
KD-24EXE
12 Flexible Button Display
KD/E-24EXE
12 Flexible Button Display
KD-24ENH
12 Flexible Button Normal
KD/E-24ENH
12 Flexible Button Normal
KD-33LD
8 Flexible Button Large Display
KD/E-8BTN
8 Flexible Button Normal
Model
Description
Model
Description
KD-DSS
48 Button DSS/DLS Console
KD/E-36LD
24 Flexible Button Large Display
KD/E DSS
48 Button DSS/DLS Console
LKD-30DS
30 Flexible Button Display
KD-Digital
Phone Box
Digital Intercom Box
LKD-8DS
8 Flexible Button Display
CTI module 1)
CTI module
LKD-2NS
2 Flexible Button Normal
LKD-30LD
30 Flexible Button Large Display
LKD-48DSS
48 Button DSS/DLS Console
Table 2.4.10 Digital Keyset and terminal
•
Note:
1. This type of terminal and KD/C and KD/EC series Keysets will not be supplied any more, but
CTIU30 which are inserted on the bottom side of LKD Keysets, are supplied for CTI operation.
See GDK-PC PHONE (CTI) in this section.
2. Minimum software requirements for LKD operation: 3.2 or later version (except 3.4 version)
Digital Keysets
General Description
Each Digital Keyset has a standard 12 button dial-pad, color coordinated handset, an integral Wall Mount
kit, a slide-out Directory Tray, an array of “Flexible Buttons”, and 12 Fixed Feature Access keys.
All of the Flexible and Fixed Buttons, except Volume, incorporate a long-life, super-bright LED to indicate
the feature or circuit status. The number of “Flexible Buttons” differ from models in above table.
The fixed feature access keys are the same for each keyset 8/2 button Keyset. Each Digital Keyset
includes a RJ-11 type jack for connection to the system. See figures from Fig 2.4.7 to Fig 2.4.11.
Speaker Phone
Each Digital Keyset except LKD-2NS is equipped with circuitry that enables the telephone to be used
hands-free in two way conversations. This circuitry provides voice-switched speaker phone operation
which gives channel control to the party with the highest energy level. The speaker phone circuit is
controlled by the user with the MON button at KD, KD/E and the ON/OFF button at LKD Keyset.
