Aria 600 Programming Manual Download Page 78

Page: 78 / 233

Aria-24/130c/130/300/600

ipe

Digital Key Telephone System Issue: 1.6

Programming Manual

BTN

ITEM

RANGE

DEFAULT

REMARK

CPN Type

0-2

This field indicates how the CPN IE is filled in SETUP

message.

0: Do not send CPN (Called Party Number) to S0. In

this case, all S0 STAs of the S port will be ringing.

1: Send station number as CPN

2: Bypass CPN from the network.

(In the case of 1 & 2, only one specific STA will be

ringing)

S0 Sub Address

0-2

This field indicates how the sub-address used in

SETUP message.

0: Station sub-address not used.

1: Sub-address is filled in the CPN field of SETUP

message.

2: Sub-address is filled in the CPSN (Called Party Sub-

address Number) field of SETUP.

Reserved

CLI Name Display

ON/OFF

OFF

If this field is ON, the system checks whether the

received CLI is matched with the speed dial data or not.

If it is matched, the speed dial name is displayed.

ISDN CLI STA

Max. 4

digit

Logical STA

No.

If outgoing CLI is active and CLI type is EXT, this field

used when making outgoing CLI.

Progress

Indication

ON/OFF

OFF

If this field ON and a SLT seizes an ISDN line, the

progress indication IE indicating the originator is non-

ISDN device is made in SETUP message.

ISDN CLIR

ON/OFF

OFF

If this field is ON, the system will not send CLI

information and restrict PX send it.

ISDN COLR

ON/OFF

OFF

If this field is ON, the system will not send COLI

information and restrict PX send it.

DID Restriction

ON/OFF

OFF

Restrict the DID Call.

DID Call Wait

ON/OFF

OFF

New DID call waiting indicate.

CLI Type

LNG/SRT

SRT

Long: Use station CLI with PGM114-BTN19. (max 12)

Short: Use station CLI with PGM114-BTN12 (max 4)

Long Station CLI

Max 12

digit

Logical STA

No.

If outgoing CLI is active and CLI type is EXT, this field

used when making outgoing CLI.

MSN Call Wait

ON/OFF

OFF

Turn ON for this station to receive a MSN Call Wait

TABLE 3.5.1 Button Configuration for ISDN Station Attributes (PGM 114)

Summary of Contents for 600










































































































































































































































Search results

Summary of Contents for 600

Reviews:

Brands by name

Popular brands

Aria 600, Programming Manual

Search results

Summary of Contents for 600

Reviews:

Brands by name

Popular brands