Aria 600 Programming Manual Download Page 136

Page: 136 / 233

Aria-24/130c/130/300/600

ipe

Digital Key Telephone System Issue: 1.6

Programming Manual

136

7.2

SYSTEM TIMERS -

(PGM 181)

PROCEDURE

SYSTEM TIMER 2

PRESS FLEX KEY (01-17)

(1)

[TRANS/PGM]

+ 181.

(2) To program, use the BTNs as TABLE 6.2.1. Press one of BTN

and enter related data. (LED of selected Flex. BTN will be

lit.)

CFW NO ANS TMR(sec)

(000

– 255) : 015

(3) To program the Call Forward No Answer Timer, press the Flex.

BTN 1. The current status will be displayed on the LCD and

user can enter a desired value. Then LCD shows the changed

value

SYSTEM TIMER 2

PRESS FLEX KEY (01-17)

(4) Press the

[HOLD/SAVE]

button for updating database

permanently.

SYSTEM TIMER 2

PRESS FLEX KEY (01-17)



Press the

[CONF]

button instead of the

[HOLD/SAVE]

button,

then system goes to step (1) without updating system memory.

BTN

ITEM

RANGE

DEFAULT

REMARK

Call Forward No Answer

Timer

000 -255

(3 Digits)

015

(sec)

The Call Forward busy/no answer feature will occur

with this timer. If this timer has a non-zero value and

an extension is set at busy, no answer forward by

station user then the extension will ring for this timer

and take place a forward to the next.

DID/DISA No Answer

Timer

00 -99

(2 Digits)

(sec)

A DID call will be forwarded attendant if the station is

busy or does not answer within this time.

VMIB

User

Record

Timer

010

– 255

(3 Digits)

(sec)

The time duration of VMIB user greeting

VMIB

Valid

User

Message Timer

0-9

(1 Digits)

(sec)

The time duration of valid VMIB user message

In case of 0, No message can be recorded.

Door Open Timer

–99

(2 Digits)

(100ms)

Determines the length of time that is needed to

activate door open relay for the setting time.

ICM Box Timer

00 -60

(2 Digits)

(sec)

Determines the amount of time programmed stations

will ring when ICM box user presses the [CALL]

button.

ICM Dial Tone Timer

01-20

(2 Digits)

(sec)

If action is not taken within ICM dial tone timer, user

will hear error-tone.

Inter Digit Timer

01-20

(2 Digits)

The time between digits cannot exceed Inter-digit

timer, or error tone is received.

MSG Wait Reminder

Tone Timer

00 -60

(2 Digits)

Determines the amount of time between repeated

reminder tones to a key telephone with a message

waiting.

Summary of Contents for 600










































































































































































































































Search results

Summary of Contents for 600

Reviews:

Brands by name

Popular brands

Aria 600, Programming Manual

Search results

Summary of Contents for 600

Reviews:

Brands by name

Popular brands