Aria 600 Programming Manual Download Page 148

Page: 148 / 233

Aria-24/130c/130/300/600

ipe

Digital Key Telephone System Issue: 1.6

Programming Manual

148

BTN

ITEM

RANGE DEFAULT

REMARK

VMIB Announce 1 Timer

000-999

015

(sec)

If this timer expires after a call is received in the

group, the system announces the greeting if exists.

VMIB Announce 2 Timer

000-999

000

(sec)

The second announcement can be provided if the

call continues to wait beyond the 2nd announcement

timer.

VMIB Announce Location 1

00-70

00 (Not

Assigned)

This is used to announce the greeting when the

VMIB announce 1 timer is expired.

VMIB Announce Location 2

00-70

00 (Not

Assigned)

This is used to announce the greeting when the

VMIB announce 2 timer is expired.

VMIB Announce 2 Repeat

000-999

000

(sec)

This is used to announce the greeting 2 when the

timer is expired. (1 Sec Base)

VMIB Announce 2 Repeat

Enable/Disable

ON/OFF

OFF

This is used to enable or disable VMIB Announce 2

Repeat.

Overflow Destination

STA#./

HUNT#/

VMIB# /

SYS SPD

The call to a station in the group will continue to

route until answered or each station in the group has

been tried. The call will remain at the last station in

the group or will be passed to this overflow

destination (Station/Hunt/VMIB/System Speed bin).

Overflow Timer

000-600

180

(sec)

If this timer expires after a call is received in the

group, the call is routed to the overflow destination.

Wrap Up Timer

002-999

(3 digits)

002

(sec)

A station in a hunt group is maintained in a busy

state for min. 2 seconds after any call for the

assigned wrap-up time.

Music Source

00-11(12)

If music source is assigned, calling user will be

heard music instead of ring back tone.

00: Not assigned

01: Internal Music

02~04: External Music

5~6(7): VMIB BGM

7(8)-11(12): SLT MOH

Max. Queued Call Count

00-99

Maximum number of queued call in the ring group

TABLE 8.2.3.1 Button Configuration for Ring Group Attribute (PGM 191)

Summary of Contents for 600










































































































































































































































Search results

Summary of Contents for 600

Reviews:

Related manuals for 600

Brands by name

Popular brands

Aria 600, Programming Manual

Search results

Summary of Contents for 600

Reviews:

Related manuals for 600

Brands by name

Popular brands