Aria 600 Programming Manual Download Page 134

Page: 134 / 233

Aria-24/130c/130/300/600

ipe

Digital Key Telephone System Issue: 1.6

Programming Manual

134

SYSTEM TIMERS

7.1

SYSTEM TIMERS -

(PGM 180)

PROCEDURE

SYSTEM TIMER 1

PRESS FLEX KEY (01-22)

(1)

[TRANS/PGM]

+ 180.

(2) To program, use the BTNs as TABLE 6.1.1. Press one of BTN

1-22 and enter related data. (LED of selected Flex. BTN will be

lit.)

ATD RECALL TMR(min)

(00

– 60) : 01

(3) To program the Attendant Recall Timer, press the Flex. BTN 1.

The current value will be displayed on the LCD and user can

enter a desired value. Then LCD shows the changed value.

SYSTEM TIMER 1

PRESS FLEX KEY (01-22)

(4) Press the

[HOLD/SAVE]

button for updating database

permanently.

SYSTEM TIMER 1

PRESS FLEX KEY (01-22)



Press the

[CONF]

button instead of the

[HOLD/SAVE]

button,

then system goes to step (1) without updating system memory.

BTN

ITEM

RANGE

DEFAULT

REMARK

Attendant Recall Timer

– 60

(2 Digits)

(min)

Determines the amount of time before system

disconnects the call

Call Park Recall Timer

000

– 600

(3 Digits)

120

(sec)

Determines the amount of time before a call placed in

a call park location will recall the station placing the

park.

Camp-on Recall Timer

000

– 200

(3 Digits)

030

(sec)

If a station transfers to busy station and hang up, this

recall timer is assigned.

Exclusive Hold Recall

Timer

000

– 300

(3 Digits)

060

(sec)

Determines the amount of time before a call placed on

exclusive hold will recall the station placing the hold.

I-Hold Recall Timer

000

– 300

(3 Digits)

030

(sec)

Determines the amount of time before a call recalls

the attendant.

Sys Hold Recall Timer

000 - 300

(3 Digits)

030

(sec)

Determines the amount of time before a call placed on

system hold will recall the station placing the hold.

Transfer Recall Timer

000 - 300

(3 Digits)

030

(sec)

Determines the amount of time a transferred call will

ring at the station receiving the transfer and how long

it will recall the station transferring the call.

ACNR Delay Timer

000 - 300

(3 Digits)

030

(sec)

When ACNR Pause Timer expires and there is no

available CO Line in the group, this timer is invoked.

When ACNR Delay Timer expired,

- Invoke ACNR Pause Timer if is no available CO line.

Still, ACNR is activated.

Summary of Contents for 600










































































































































































































































Search results

Summary of Contents for 600

Reviews:

Aria 600, Programming Manual, Page: 134 / 233

Search results

Summary of Contents for 600

Reviews: