CARMEN OCR INSTALL GUIDE
Page 4/12
2.
HANDLING PRECAUTIONS
There are some standard precautions that should be followed when handling the Neural Network
Controller (NNC) card or any other electronic hardware component:
1.
Keep the card in its anti-static bag until it is ready to be installed.
2.
Protect the card from static electricity by grounding your body and the equipment during
installation. Wear a grounded wrist strap, or touch the metal case or chassis of the PC before
touching the card.
3.
Always grasp the card by its edges.
4.
Do not touch the components on the card or
the “gold finger” connectors plugged into the
expansion slot. Instead, grasp the card by its mounting bracket.
5.
Ensure the system power is completely turned-off before doing any installation work. In case
of PCs with ATX power supplies, it is recommended to unplug the power cord before
installation.
During hardware installation, exercise caution when handling hardware components as
these might have sharp edges or protruding parts that can cause hand injuries.
