PiCUS TreeQinetic Manual
33
5.6.3 Page
– Live View Diagram
This page displays the live data of a running measurement in
clearly arranged bar charts.
NOTE Only the absolute values of the measurements are
displayed here.
One chart is displayed for each device type, which shows one bar
for each sensor module found during the device search. The
following information is displayed here:
1. Alarm limit set for this device type
2. Device color
3. Current measuring value (length of bar)
4. Current measuring value numerical (on top of each bar)
5. Alarm state (background color of diagram)
Green: No Alarm
Yellow: Measuring value is > 90% of limit value
Red:
Overload alarm, measuring value of at least one
sensor module has reached alarm limit
5.7 Tab
– Data View
5.7.1 Page
– Result
This page shows a short summary of the measurement just performed:
1. Start time of measurement
2. Duration of measurement
3. Duration of data recording
4. Number of recorded data points
5. Max. Force during Measurement (see
6. Rope angle at max. Force (see
Fehler! Verweisquelle konnte nicht
gefunden werden.
for details)
7. Button: Save measurement
The recorded measurement data is
stored as a file in the
mobile device’s
memory
→
the view automatically switches
back to the tab
Project
and the page
Test Setup
8. Button: Discard Measurement
All recorded data is discarded
→
the view automatically switches
back to the tab
Project
and the page
Test Setup
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
