Avon Protection
33 DAS775571AA Version 9, December 2015
GR 13313 CR121804
It is recommended to use MS Paint to create the image file.
2.
Turn the camera on.
3.
Connect the camera to the computer via the Argus® Mi-TIC Charger Station and the
supplied USB lead.
4.
The computer should recognise the memory card as a ‘Mass Storage Device’ and
open a file explorer window.
5.
Copy the image file from the computer to the top level ‘ARGUS TIC’ directory.
6.
Close the window.
7.
On computers running MS Windows
®
it is recommended to select ‘Safely Remove
Hardware’ before disconnecting the camera.
8.
Remove the camera from the Argus
®
Mi-TIC Charger Station.
9.
Turn the camera off and back on. The camera will read the new image file when it
turns on.
10.
Wait until the displayed status message clears.
11.
Turn the camera off and back on again, the new splash screen image will appear at
start-up.
Keep a copy of the image file on your computer. The camera will rename the image file
on the memory card to XSPLASH.BMP after it has been successfully loaded into the
camera.
In the event that the splash screen fails to load into the camera, the camera will rename
the image to ERRSPLASH.BMP. Providing the settings described above are adhered to, the
custom start-up image can be loaded into the camera.
5.2
How to Copy the Memory Card Contents to a PC
Images and videos can be copied to a PC as follows:
1.
Turn the camera on.
2.
Connect the camera to the computer via the Argus
®
Mi-TIC Charger Station and the
supplied USB lead.
3.
The computer should recognise the memory card as a ‘Mass Storage Device’. If an
explorer window does not open automatically, select ‘My Computer’ to locate the
memory card.
4.
Files can be copied from this window to directories on the computer.
5.
Close the window.
6.
Remove the camera from the Argus
®
Mi-TIC Charger Station.
