Avon Protection
24 DAS775571AA Version 9, December 2015
GR 13313 CR121804
3.8
Display Warning Graphics
The Argus
®
Mi-TIC is equipped with an advanced microprocessor based control and user
warning system. In addition to controlling the automatic operation of the camera to
ensure the best possible picture at all times, the control system provides graphics on
the display to alert the user to certain conditions as follows:
3.8.1
Over-temperature Warning
The internal temperature of the camera is above the correct
operating range. The camera must be turned off to cool down and
prevent permanent damage.
If the user ignores this warning and continues to operate the
camera in very high temperatures, the warning symbol will flash.
When the flashing temperature warning is present, the camera is very close to its
absolute operating limit and the image will start to degrade considerably. The user
must remove the unit from the high ambient temperature at this time; failure to
comply may result in permanent damage to the unit. Failure to act upon this level of
warning may result in serious damage to the system and may invalidate the warranty.
3.8.2
General System Failure Warning
The control system has detected an internal camera fault. Turn the
camera off for five minutes and turn back on again. If the warning
symbol is still present, or the symptoms return, contact your Avon
Protection representative.
Failure to act upon this level of warning may result in serious damage to the system
and may invalidate the warranty.
