Avon Protection
32 DAS775571AA Version 9, December 2015
GR 13313 CR121804
2.
Using 18 AWG wire or thicker, connect the terminals as shown overleaf, ensuring that the
positive (+ve) terminals are connected together and that the negative (-ve) terminals are
connected together.
3.
Replace the front panels on the charger stations.
Note: Do not use the rear power connector when in the ‘daisy-chain’ configuration. All power
must be supplied through the front hard wiring connectors.
5
CONNECTING THE CAMERA TO A PC
The camera has embedded storage which is used for:
•
Changing the start-up image
•
Storing images
•
Storing videos
•
Storing camera diagnostic information
•
Updating the camera software
•
Storing a copy of the Configuration Tool Software (see section 6)
•
Storing a copy of the manual
5.1
Changing the Start-Up Image
A custom start-up image can be loaded into the camera as follows.
1.
Generate an image file on a computer in the following format:
Name:
Splash.bmp
File format:
Bitmap
Dimensions (HxV):
320 x 240 pixels
Bit depth
24 Bit
File size:
230,454 bytes
