manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 83

7 Operation on xDSL accesses

83

ARGUS 165

 

Establishing the VDSL connection

Virtual line selected.

Router selected.

The router can also be activated directly. If 
layer 1 has not yet been established, this 
is automatically started as well.

<Edit>

VDSL settings.

<Access>

Edits an access.

<Start>

Starts VDSL.

Switch to router mode using 
the cursor keys, see 
page 94.

When the physical layer is active (only 
ADSL), you can run the following tests 
using the softkey 

<Test>

, see page 116.

No tests are available when 
router mode is active.

<Edit>

Edits the parameters, see 
chapter „9 Virtual lines (VL)“ 
(see page 93).

<Edit>

Bridge/router parameter 
settings, see page 52.

Establishing the VDSL router.

The VDSL connection is active.

See page 80 for bridge mode display and 
operation.

Switch to Router using 
the cursor keys, see 
page 94.

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands