manualshive.com logo in svg

Argus 165, Manual

Share
Download
Argus 165 Manual Download Page 105

9 Virtual lines (VL)

ARGUS 165

 

105

TPID:

Tag Protocol Identifier

The TPID is a 16-bit sub-field within the 4-byte VLAN 
data field. This field contains the tag information defined 
by IEEE 802.1q.

Default:

VLAN 1: 

8100 hexadecimal

VLAN 2: 

88A8 hexadecimal

Note:

When using two VLANS with layer 3 (IP) or layer 4, both 
are to be set to 8100.

PPP profile:

User name           

Entry of the user name assigned by the carrier. The user name is 
entered using the number keys. Pressing the right softkey changes 
the meaning and thus influences the input via the number keys 
(letters (upper and lower case) and numbers).

Password                                          

Entry of a password (max. 55 characters) assigned by the carrier; 
see "User name" for an explanation.

During entry, the characters of the password are visible until Enter 
is pressed once. The characters are subsequently only displayed 
encrypted with "*".

Set IP

When "yes" is set, the IP address defined under IP/own IP address 
(see below) is used for connecting.

Default: 

no

Current delay

Once a PPP connection has been established, the test is only 
started after the preset delay time has elapsed.

Range: 2 - 10 seconds

Default: 

2

Profile name

Enter the name of the PPP profile.

PPTP

PPP settings (Point-to-Point Tunnelling Protocol)

Own server IP address

Range 0.0.0.0. to 255.255.255.255

Default: 

0.0.0.0

Summary of Contents for 165












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands