Argus 165 Manual Download Page 328

Page: 328 / 363

The following symbols can
appear in the ARGUS main
display area.

30 Appendix

328

ARGUS 165

Symbol Colour

Description

grey

The service is not yet assigned to a virtual line.

grey

This service, VL or physical layer is idle.

grey

The service is unavailable.

yellow

Activating the physical layer, VL or service.

yellow

Physical layer, VL or service deactivated due to an unexpected occur-
rence.

yellow

Deactivating.

green

Synchronisation achieved (physical layer) or a VL or service was acti-
vated successfully.

green

A test is currently running in this service.

red

An error has occurred.

grey

Preparing activation of physical layer, VL or service.

orange

The Tx and Rx values are not equal in the VoIP QoS test.

green

Test running.

red

Test stopped.

green

Active Probe is active and correctly supplied from ARGUS.

Summary of Contents for 165












































































































































































































































































































































































Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands

Argus 165, Manual

Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands