Argus 165 Manual Download Page 102

Page: 102 / 363

9 Virtual lines (VL)

102

ARGUS 165



The services Data and VoIP are active.
You can now run a variety of tests via the
services Data and VoIP.



The display and operation for IPTV and VoD (video on demand) are the same as for VoIP.

Further examples of different virtual line assignments:

Example 1:

Example 2:



One virtual line is connected with the



service Data and another with the service
VoIP.



The virtual line for VoIP can thus be used
for different protocol data than the virtual
line for Data.



One virtual line was configured for the
services Data, VoIP, IPTV und VoD.



In this example, the services IPTV and
VoD are active.



Up to four virtual lines can be
established for the service IPTV.



However, ARGUS only displays
these as a single composite virtual
line.



A detailed description is provided in
the chapter IPTV, see page 196.

Summary of Contents for 165












































































































































































































































































































































































Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands

Argus 165, Manual

Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands