Argon 18 ELECTRON PRO, Assembly Manual, Page: 8 / 33

8
ELECTRON PRO: 5. Frameset Inspection
BEFORE ASSEMBLING YOUR NEW ELECTRON PRO, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Frameset parts checklist (see p.10)
2. Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
3. For reference, check serial number and write it on p.2
4. All the necessary bolts (refer to Frameset Parts, p.9)
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their torque specifications.
Parts installed on frame Description SKU Hex Key Torque Detail
1 Rear dropout inserts 6x FHCS_M4x8 Included in 80602 2.5mm 1.5Nm Loctite 242
2 Seat post clamp 1x SHSS_M8x16 Included in 80577 4mm 5.5Nm Grease
3 Seat post head chariot 2x SHCS_M5x16 80584 4mm 6Nm Grease
4 Fork steerer 1x SHCS_M5x12 N/A 4mm 5.5Nm Grease
5
Steerer module
1x SHCS_M6x35
Included in 80485 5mm 10Nm Grease
6 2x SHCS_M6x12
7
Aerobar
1x SHCS_M6x30 80598
5mm 12Nm Grease 8 1x SHCS_M6x45 80599
9 2x SHCS_M6x20 80600
10
Extension clamp’s bottom
4x FHCS_M5x15 80590
3mm 5Nm Grease
11 4x FHCS_M5x25 80592
12 4x FHCS_M5x35 80593
13 4x FHCS_M5x45 80594
14 4x FHCS_M5x55 80595
15 Extension clamp’s top / bridge 4x FHCS_M5x18 80591 3mm 6Nm Grease
16 Armrests 4x FHCS_M5x12 80596 3mm 5Nm Grease