Argon 18 ELECTRON PRO, Assembly Manual, Page: 11 / 33

11
ELECTRON PRO: 7. Seat Post Head Assembly
Slide seat post shuttle (3) into seat post rail
at desired position. Screw seat post chariot
(1) onto shuttle (make sure shuttle M5
holes are aligned upwards) with M5x16 (7)
screws and tighten to 6Nm.
Loosely assemble remaining seat post head
as shown.
Install saddle inserting rails between upper
clamp (5) and lower clamp (4). Adjust
the angle, the offset of the saddle using
both M5 Hex bolts (8). Tighten using 8mm
wrench.
Note: While the seat post chariot lets you
adjust saddle setback in a wide positioning
window, the lower clamp can additionally
be flipped to change saddle setback by
5.2mm.
(3) 80580
80583 80579 (7) 80580
(5) 80582
(8) 80585
(1) 80578
(4) 80581