UM Agitatore magnetico riscaldante digitale M2-D Pro ENG rev.0 11.05.2020
User manual M2-D Pro digital heating magnetic stirrer
Safety instruction
•
Read the instructions carefully before use
•
Make sure that only qualified personnel use this tool
•
Do not heat easily flammable or highly volatile substances
•
Be very careful when touching the heating plate. It can reach a temperature
of 340 ° C.
•
Be careful even when the instrument has been turned off because the plate
remains hot even for a long time.
•
Before use, make sure that the instrument is connected to an earthed socket
•
During work, staff must prevent risks of:
o
Splashing and / or evaporation of liquids;
o
Emission of toxic or combustible gases.
•
Place the instrument in a suitable area, on a stable, clean, non-slip, dry and fireproof surface;
•
Do not use the instrument in explosive atmospheres, containing dangerous substances or under water;
•
Gradually increase the stirring speed;
•
The set heating temperature must always be at least 25 ° C lower than the combustion temperature of the
heated substance used;
•
Pay close attention to the risks due to:
o
Flammable materials or samples with low boiling temperature;
o
Excessive filling of samples;
o
Unsafe and / or unsuitable containers for heating;
•
Use any pathogenic samples only in closed containers;
•
Check that the instrument and accessories are in optimal condition before use. Never use damaged
components. Optimal safety and operation are guaranteed only if the instrument and accessories described
are in order. The accessories must also be firmly connected to the device;
•
The instrument can be disconnected by disconnecting it from the power supply or by disconnecting the cable;
•
The operating voltage indicated on the instrument label must correspond to that of the network to which it is
connected;
•
Make sure that the power cable does not touch the heating plate;
•
The tool can only be opened by specialized technicians;
•
Keep the instrument away from electromagnetic fields;
•
Respect the minimum distance between the devices and between the device and the wall (minimum 10 cm).
