11
4. Technical Data Sheet
5. Assembly
Carefully remove the bike from the packaging* and remove the protective material taking care not to damage the relevant
aesthetic parts or force the cables and pre-assembled components.
* The bike must be removed from the packaging by two adults to ensure that it is not damaged and avoid the risk of injury
and/or crushing.
Handlebar installation
Rotate the fork until it is positioned in front of the frame,
checking that the handlebar mount sits in front of and is
aligned with the frame, pending any subsequent adjustment
required following installation of the handlebar and fitting of
the front wheel.
Correct fork positioning
Remove the bolts securing the front clip at the end of the handlebar mount and insert the handlebar into the housing in the
central position.
Place the previously removed handlebar mount front clip in its original position and lightly and alternately tighten the securing
screws to adjust the correct positioning of the handlebar. Complete the operation by tightening the screws.
Before: handlebar not fitted
After: handlebar fitted
Front wheel installation
Insert the front wheel into the appropriate fork housings (forks) and tighten with the appropriate quick release device (fig. A).