OpenTracker USB User’s Manual
28
POWER
on|off|<0-255> (seconds)
ON
or
OFF
will manually set the state of the power relay control pin (AUX
IO). Specifying a value in seconds will enable automatic power control
mode, where the power output is turned on for the specified number of
seconds prior to transmission, and turned off immediately after
transmission.
Return value: 0 = Off, 1 = On, 2 = Timed
PROFILE
1 | 2
Selects the configuration profile to use.
PROPWPT
on|off
Enables proprietary waypoint strings. With
PROPWPT OFF
, output formats
are $GPWPL and $PGRMW. With
PROPWPT ON
, $PKWDWPL, $GPWPT,
and $PMGNWPL are output.
PTTINPUT
on|off
Enables PTT input for mic encoder opration. A position packet will be
transmitted when the mic PTT is released.
PULSE
<0-255> (seconds)
Activates power output for specified duration.
PWAUTH
on|off
Enables one-time password authentication.
QUIET
<0-255>
Time channel must be free before transmission can occur, in 1/64 second
units.
REARM
<0-255> (milliseconds)
Specifies minimum time between counter inputs. May be used for switch
de-bouncing.
REPLY
<message>
(local only)
Sends a text message to the last person who sent a message addressed to
this unit's callsign
RETRIES
<0-255>
Number of times to retransmit an outgoing message.