OpenTracker USB User’s Manual
27
MYCALL
<xxxxxx-nn>
Sets the unit's callsign and optional SSID.
NICE
<n>
When the tracker hears one of its own packets digipeated, it will skip the
following <n> transmissions. This allows a faster beacon rate to be used in
areas with poor coverage, without increasing the load on the network in
areas with better coverage.
OUTPUT1
on|off
Not currently implemented.
PASSALL
on|off
Normally the tracker ignores all received packets that fail a frame check
sequence test.
PASSALL
disables the FCS test. This option should only be
used for troubleshooting as it will result in output of corrupted packets.
PASSLIST
[n]
(local only)
Generates a list of the next
n
one-time passwords to be used, based on the
pass phrase entered with the
SECRET
command. Default is 144.
PATCH
<hex string>
The patch command allows direct modification of the contents of the
tracker’s flash memory. This command should only be used as directed
by the manufacturer. Improper use of this command may render the
tracker inoperable.
PATH
<call1,call2,…>
Comma-separated digipeater path list, containing up to three digipeater
addresses.
POSITION
<hhmm.mmx hhhmm.mmx> | GPS
Sets fixed position or enable GPS. Position must be entered in degrees
and decimal minutes, including leading zeros. Setting position to 'GPS'
reverts to GPS tracking mode.
Example: POSITION 4851.49N 00217.66E
Return value: 0 = Using GPS, 1 = Fixed Position, 2 = Position Unknown