1. Begin the tail wheel assembly by installing the hollow hex bolt and lock nut into the large hole at the rear
of the tail wheel bracket.
2
．
Slide 3 wheel collars and the wheel onto the pre-bent tail wheel wire and tighten in place with thread lock as shown
below.
3
．
Install steering rod, again, the use of thread-lock on any metal to metal screw is advised.
Summary of Contents for MX2 50CC V2
Page 1: ...ARF MODEL MX2 50CC V2 Instruction Manual ...
Page 9: ...Scheme A White black green ...
Page 10: ...Scheme C Red white black ...
Page 42: ......
