neutral. Double check all screws, bolts and nuts to assure proper installation and operation without
binding.Once satisfied, permanently attach the ball link to the servo arm with the supplied screw and nut.
11. Check the final radio operation of the ailerons and make sure there is no binding or servo fighting of
each other. Also check to make sure all linkage bolts and nuts are secure.
Use the wrench to adjust the pushrod to the appropriate length.
Elevator Assembly
NOTE: There are pictures of different planes in this manual, however, this plane’s elevator is assembled the
same way.
1.
Push rod linkage set for elevator. 3x60mm Pushrods for elevator.
2.
Find the slots for the control arms in the elevators and remove the covering where the horns are
inserted and the area for the plate.
Summary of Contents for MX2 50CC V2
Page 1: ...ARF MODEL MX2 50CC V2 Instruction Manual ...
Page 9: ...Scheme A White black green ...
Page 10: ...Scheme C Red white black ...
Page 42: ......
