Full manual available to download from: www.Ares-RC.com
15
Remove the transmitter battery
cover and insert four AA alkaline
cells (not included) taking care to
observe the correct polarity.
16
16
Switch ON your transmitter,
ensure the LED is lit solid red and
move the throttle stick to its low
position.
Switch ON your transmitter,
ensure the LED is lit solid red and
move the throttle stick to its low
position.
17
Centre all the trim levers noting
that trim center is indicated by an
audibly longer beep tone.
18
Connect the battery to the
Electronic Speed Controller (ESC).
A series of three regular beeps,
followed by two audibly dissimilar
beeps will be heard indicating that
the ESC is armed and operational.
Mode 2
Mode 1
