Full manual available to download from: www.Ares-RC.com
5
Slide the vertical stabilizer into its
slot at the rear of the fuselage and
push it fully home.
6
Check the orientation of the main
undercarriage then slot each leg
into the mount making sure to align
the rectangular hole in the leg with
the matching hole in the mount.
7
Insert the undercarriage nose
leg into the joiner tube, position
the flat section of the leg directly
behind the Allen screw, then
securely tighten the screw to clamp
the leg in place.
8
Join the two wing panels using the
main spar noting that these do not
need to be glued together.
9
Connect the aileron leads to
the Y-lead extensions that are
plugged into Channel 1 of the KA-6
receiver.
Main Spar
