Arecont Vision MegaView
®
2 Installation Manual
Page | 23 [email protected]
Web Interface
i.
Access the camera’s web interface by typing
in any web browser:
http://ip_address
or
http://ip_address/index.html
ii.
Scroll to the SD Card section
iii.
Select one of the recording methods:
-
Continuous Recording
to start
continuously recording
-
Stop Continuous Recording AND Enable
Event-triggered Recording
to enable
events recording for network failure,
motion alarm and/or I/O alarm trigger
iv.
You will see the
Start
and
End
times once the
camera starts recording (see image below).
The start time represents the beginning time
of the oldest recording.
v.
To playback recorded video:
1. Input the date and time of the
desired video (must be set
between the Start and End time).
2.
Check the “Playback SDcard
video” checkbox to play the video.