Arecont Vision MegaView
®
2 Installation Manual
Page | 15 [email protected]
Switching Level
this slider bar and numeric
field control the switching point when the
camera switch
es from “Day” (color) into
“Night” (black & white) mode. Higher values
cause the camera to stay in “Day” mode at
lower illumination levels, lower values will
cause the camera to switch to “Night” mode
in higher illumination
Toggle Guard
this slider bar and numeric
field control the level of brightness required
to switch from “Night” (black & white) into
“Day” (color) mode. Higher values will cause
the camera to stay in “Night” (black & white)
mode longer than lower values as
illumination levels rise. Toggle Guard should
be adjusted to prevent the mode from
toggling between “Night” and “Day” modes
in areas where transitional lighting exists in
the scene
Enable P-Iris
this button enables the P-Iris
control function on the camera
Note: If “Enable P-Iris” is unchecked, the iris will
be fully open to the maximum. It may result in
less sharpness and artificial color under strong
light condition as the image shown below.
Binning
control operation of the “binning”
function when using a 3, 5, or 10mp camera
model
i.
Binning in day mode
will place the
camera in binning mode when the
camera is in “Day” mode
ii.
Binning in night mode
will place the
camera in binning mode when the
camera is in “Night” mode
Downscaling
user can downscale their desired
image resolution
Scaling Size
sets down-scaling image size