Wall Mount (MD-WMT2) Installation Instructions (Sold
Separately)
Caution:
MD-WMT2 only fits with SV-JBA and SV-EBA
but not with the older MD-JBA and MD-EBA!
Inside the box:
A. Wall mount
B. Top shield
C. Mounting template
D. One double-sided hex key
E. Pack of four (4) machine screws (#8-32
½”)
F. Pack of four (4) screws and four (4)
anchors
Not included but needed:
G. #2 Phillips head screwdriver
Image 17
1. Remove the wall mount and hardware
from the box.
Image 18
2. Using the mounting template, prepare
the mounting surface.
3. Attach wall mount to the wall using
screws or any optional hardware
4. suitable for the mounting surface.
5. Install top shield on the wall mount as
shown in image 18.
6. Fasten the socket set screw using the
double-side hex key (D).
7. Run the Ethernet cable and outside
power cable (if necessary) through the
wall mount.
8.
For installation of the camera, please
reference “Mounting the Camera.”
B
E
D
C
A
F
