Arecont Vision HSG2 Installation Manual
12 | P a g e
HSG2 Pole Mount Adapter (MD-PMA) Installation Instructions
Inside the box:
A. Pole Mount Adapter
B. 2x Compression Fittings
C. 2x Small Steel Straps
D. 2x Large Steel Straps
E. Pack of four (4) machine screws
Not included but needed:
#2 Phillips head screwdriver
MegaDome
®
Wall Mount, MD-WMT2
Image 14
1.
Remove pole mount adapter, compression
fittings, steel straps and hardware from the
box.
2.
Install compression fittings to pole mount
adapter as shown in
Image 15
.
3. Run the Ethernet cable and outside power
cable (if necessary) through the compression
fittings.
4.
Attach the wall mount to pole mount adapter
as shown in
Image 16
.
5. Use the supplied two large or small steel
straps to attach the pole mount adapter to the
pole and tighten the compression screws as
shown in
Image 16
.
6. Attach HSG2 housing to wall mount adapter.
Please reference “
Mounting the Camera,
” if
needed.
7. Tighten the compression fittings to seal the
wiring holes.
Image 15
Image 16
A
B
C
D
E
Steel
Strap
