Arecont Vision HSG2 Installation Manual
5 | P a g e
HSG2 Junction Box Adapter (SV-JBA) for MD-WMT2 Installation Instruction
Caution:
Use of SV-JBA is recommended for outdoor
installation on hard surfaces requiring external
conduit.
Inside the box:
A. Junction Box Adapter
B. Pack of four (4) machine screws
C. One double-sided hex key
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. Mounting
Template
Not included but needed:
#2 Phillips head screwdriver
HSG2-WMT ( HSG2 Wall Mount)
¾” NPT Conduit (if necessary)
Image 12
1.
Remove the junction box and hardware from
the box.
Image 13
2.
Remove the conduit plug by first removing the
socket set screw by using the provided hex
key.
3. Attach the junction box adapter to the wall
using drywall screws or any optional hardware
suitable for the mounting surface.
4. Run the Ethernet cable and outside power
cable (if necessary) through the junction box
adapter.
5.
Attach HSG2 wall mount to the junction box
adapter as shown in
Image 13
.
6. Connect ¾” NPT conduit to the junction box
adapter.
7.
For installation of the camera, please
reference “
Mounting the Camera.
”
B
C
A
D
E
